|Messages posted here can also be received as emails: information||pre-print options:|
|Forums and resources for users of Templot track design software||about Templot Club|
|Please click: important information for new members and first-time visitors.
||quick links: files, photos and messages archive on Yahoo|
|main Templot web site|
|Single message by Bill Vallance Topic: 7 1/4, 5, & 3 1/2 Multi gauge track|
view images in gallery
view images as slides
Nigel Fisher wrote:
A friend and I have used Templot successfully at 5inch gauge for both turnouts and (as in the photo, seen during a test fit) a tandem.
Thanks for your reply. The picture attached shows part of our layout and would be the picture I would us in the GIMP? I need to connect the straight track which is in line with the camera to the 1st curved track on the left. The track will run from were the bush is and past the top of the head shunt. Do I start in Templot and the go into GIMP or can I do it straight from GIMP?
Attachment: file1.jpeg (Downloaded 35 times)
|about Templot Club|
|Templot Companion||live online chat||Please click: important information for new members and first-time visitors.|
|Please read this important note about copyright:
Unless stated otherwise, all the files submitted to this web site are copyright and the property of the
respective contributor. You are welcome to use them for your own personal non-commercial purposes.
If you want to re-publish any of this material or use it commercially, you must first obtain
the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason.
|Problems with this web site? Contact email@example.com.||
Powered by - © 2009