|Messages posted here can also be received as emails: information||pre-print options:|
|Forums and resources for users of Templot track design software||about Templot Club|
|Please click: important information for new members and first-time visitors.
||quick links: files, photos and messages archive on Yahoo|
|main Templot web site|
|Single message by Andrew Duncan Topic: Building Yeovil Pen Mill in EM|
view images in gallery
view images as slides
Uploading these photos almost drove me round the bend tonight. Try as I might I couldn't get the captions to work or get the pictures to load in anything other then haphazard order.....!!!!
So anyway here's a bit more progress with the MPD.
I'm using a London Road Models turntable 50' (although it should only be 44') which is turning into a very nice model and its driven by a Chatham models turntable drive which, so far has proved a relatively easy install once I'd got the wiring the correct way round!
The track that I built 3 years ago went down surprisingly easily although I've not rested it yet under power. Like the junction I'll be using Megapoints controller and servos to switch the turnouts. Handily there are four spare ways on the junction board that will deal with them. This time though I'm going to use conventional micro switches to change the polarity of the crossings.
I hope the chronology is reasonably clear.
|about Templot Club|
|Templot Companion||live online chat||Please click: important information for new members and first-time visitors.|
|Please read this important note about copyright:
Unless stated otherwise, all the files submitted to this web site are copyright and the property of the
respective contributor. You are welcome to use them for your own personal non-commercial purposes.
If you want to re-publish any of this material or use it commercially, you must first obtain
the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason.
|Problems with this web site? Contact email@example.com.||
Powered by - © 2009