|Messages posted here can also be received as emails: information||pre-print options:|
|Forums and resources for users of Templot track design software||about Templot Club|
|Please click: important information for new members and first-time visitors.
||quick links: files, photos and messages archive on Yahoo|
|main Templot web site|
|Single message by Phil O Topic: Building Yeovil Pen Mill in EM|
view images in gallery
view images as slides
John Shelley wrote:
Phil O wrote:JohnI agree with Andrew, keep all servo cabling well away from traction cabling, if they have to get close too each other wrap them in foil as this helps to shield them from each other.Or use a screened wire, easier than trying to wrap foil around. Earth the screen, or foil, of course.
I wrap the foil around the whole bunch of cables, not each individually. I only had to do it once where there was a conflict of the two cable runs, overal about 9inches or so on each run was enough to stop the twitch.
|about Templot Club|
|Templot Companion||live online chat||Please click: important information for new members and first-time visitors.|
|Please read this important note about copyright:
Unless stated otherwise, all the files submitted to this web site are copyright and the property of the
respective contributor. You are welcome to use them for your own personal non-commercial purposes.
If you want to re-publish any of this material or use it commercially, you must first obtain
the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason.
|Problems with this web site? Contact firstname.lastname@example.org.||
Powered by - © 2009