|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 14 Jun 2010 13:13 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
Hi, I've recently added a range of Finescale Metal Insulated Tiebars for scales/gauges 2mm scale to 7mm scale, to my range of products, you can see a picture of the 0 Gauge version here. Finescale Tiebars 0 Gauge 2_152349_290000000.jpg Borg-Rail 0 Gauge Stretcher Bars (Manufacturer's Photo) From: http://www.borg-rail.com Advantage over any other version of using copperclad 1) Copperclad moving tiebars are too rigid and may eventually break the soldered joint 2) Copperclad moving tiebars which use some sort of pin pivot can eventually fail due to the pivot wearing through the tiebar. Advantage over other scale tiebars 1) Being metal they are easy to connect to underboard point motors, a simple loop is all that is usually needed. 2) tiebar will deform rather than snap or break, but is rigid enough to operate blades. 3) Easy to alter to your exact standards.(within reason of course!) |
||
Last edited on 1 Jun 2015 14:30 by Stephen Freeman |
|||
posted: 15 Jun 2010 20:34 from: JFS
click the date to link to this post click member name to view archived images |
Hi There, Just to mention that your Finescale Insulated Tiebars 0 Gauge. link returns a 403. Regards, Howard. |
||
posted: 16 Jun 2010 00:52 from: bainin
click the date to link to this post click member name to view archived images |
Link is "forbidden". |
||
posted: 16 Jun 2010 05:05 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi Stephen, There seem to be problems with your web site, so I have added your product picture directly to your message via the Image Gallery. I've also added a link to your site (which you omitted). You also omitted to sign your message. There are some problems with your web site for those with screens set to 120dpi, due to incorrect use of absolute positioning. Users of Firefox should zoom out one step (CTRL+MINUS) to see it correctly. regards, Martin. |
||
posted: 16 Jun 2010 06:40 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
Hi, Web site server was perhaps down for maintenance, if so, exactly the same can be seen on http://www.borg-rail.com I assumed that I didn't have to add my name as the from panel would have sufficed. I am aware of the problems of absolute positioning but haven't had the time to improve matters, my main computer screen is set to 1152x864 32bit if that helps Stephen |
||
Last edited on 16 Jun 2010 06:42 by Stephen Freeman |
|||
posted: 16 Jun 2010 16:04 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
1 Fixed 2 Don't understand why it did that but I've altered it now. 3 Clicking on the photo always worked though! |
||
posted: 16 Jun 2010 16:23 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Borg-Rail wrote: 2 Don't understand why it did that but I've altered it now.Hi Stephen, It's because you have overlapping blocks with absolute positioning. One block was obscuring part of the other and capturing the mouse messages. Why not use HTML tables instead for simple non-dynamic pages like this? Tables may be old-hat but they work every time, are ultra-reliable on all browsers and dpi settings, and are very easy to code. regards, Martin. |
||
posted: 9 Mar 2011 17:16 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
True but as I'd somehow managed to lose the link it has at least reminded me to sort that out. | ||
posted: 15 Mar 2011 11:10 from: Les G click the date to link to this post click member name to view archived images |
Borg-Rail wrote: 1 Fixed I am probably not the first to tell you that it is "unfixed" again. The tie bars look like being worth a trial... Any chance that you could post a new working link ( and perhaps edit the u/s ones out) regards Les G |
||
posted: 15 Mar 2011 11:49 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
Well it looks like it works for me now. I just wonder if the server was down at the time. What I was referring to was the link on my website. You can view all the images there in one go. Just to make it easier here is the Link and if that doesn't work try this link instead. Stephen |
||
posted: 16 Mar 2011 13:18 from: Les G click the date to link to this post click member name to view archived images |
Hi Steve, Thankyou. Latest links both ok. However, please be advised that the Link in your message of 14 Jun 2010 (above)continues to produce error 403. regards Les G |
||
posted: 16 Mar 2011 16:08 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
I think it's a Zymic thing - if you actually type in the link address it seems to work but not always if you click the link. I've altered the link to the other website, seems to work OK to me. |
||
Last edited on 16 Mar 2011 16:11 by Stephen Freeman |
|||
posted: 1 Jun 2015 14:31 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
Zymic appears to be no no longer working and I haven't used them for some time so I've edited the original post | ||
posted: 1 Jun 2015 23:16 from: madscientist click the date to link to this post click member name to view archived images |
Are they round ? Ie bar types or flat types of tie bat | ||
Last edited on 1 Jun 2015 23:17 by madscientist |
|||
posted: 2 Jan 2017 10:47 from: Stephen Freeman
click the date to link to this post click member name to view archived images |
Don't know why I haven't seen this before but the answer is you can have both, though I usually use AMBIS these days. madscientist wrote: Are they round ? Ie bar types or flat types of tie bat |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |