|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 30 Sep 2010 20:13 from: RichardTP
click the date to link to this post click member name to view archived images |
Hi Not sure if this is what I want but if you view my attached templates you will see that I am trying to make a return curve on the inside to link up with the curved track piece. I have been struggling with this for a couple of days and can't work out how to do this. Can you please point me in the right direction? Thanks Richard |
||
Attachment: attach_893_1258_inner_curve.box 285 | |||
posted: 30 Sep 2010 20:32 from: Martin Wynne
click the date to link to this post click member name to view archived images |
RichardTP wrote: if you view my attached templates you will see that I am trying to make a return curve on the inside to link up with the curved track piece.Hi Richard, 1. Set the turnout template to the required TS adjacent track spacing (you have 83.82mm centres on the other tracks). 2. In the V-crossing options change to a parallel type crossing. 3. do > exit track > snap to end of return curve menu item. 4. store & background. 5. Shorten the other tracks to the boundaries (or extend the turnout template to replace them). There are other options -- there is an entire tutorial covering return curves: http://www.templot.com/martweb/mintut1a.htm regards, Martin. |
||
posted: 30 Sep 2010 20:46 from: RichardTP
click the date to link to this post click member name to view archived images |
Hi Martin Thanks for your prompt reply. I will give it a try. Regards Richard |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |