|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 15 Mar 2011 12:07 from: kenbec
click the date to link to this post click member name to view archived images |
I have decided to use code 40 track but haven't yet decided whether to use the N or 2mmFS gauge width for the standard track. As a test to allow me to create test straight track in both gauges I created a simple 500mm length drawing in N for UK gauge and printed it. I then changed to 2mmFS gauge using the gauge/scale selector and printed it. In both cases the Information Panel showed the correct gauge of 9mm and 9.42mm respectively. The printouts were identical. Does this mean that changing the gauge is not possible after a track template has been created? I thought from other reading that a change as simple as this was possible. Is the only way I can get a printout of a 2mm 9.42mm gauge straight by creating it as an original? This is not a problem with the turnouts I have designed as I intend to still use the 9mm standard in their case. Regards, ken PS Immediately after posting the above I remembered that the startup template is always altered so this type of change is obviously possible, what could I have done wrong? |
||
Last edited on 19 Mar 2011 05:44 by kenbec |
|||
posted: 15 Mar 2011 12:18 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi Ken, The track gauge setting is specific to each template. To change an individual template to a different track gauge: 1. delete to the control 2. change the track gauge (using match original option) 3. store & background To change an entire track plan to a different track gauge, use the convert group button on the full gauge/scale dialog (other gauges... menu item). regards, Martin. |
||
posted: 15 Mar 2011 12:25 from: kenbec
click the date to link to this post click member name to view archived images |
Now THAT was quick. Thanks Martin ken |
||
posted: 15 Mar 2011 23:30 from: kenbec
click the date to link to this post click member name to view archived images |
Martin Wynne wrote: Hi Ken,Hello Martin, That worked a treat. What I don't understand is why I don't have to go through this procedure when changing the false template at the beginning. Ah well ours is not to reason why etc. Regards, Ken |
||
posted: 16 Mar 2011 00:11 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Kenneth Beckett wrote:What I don't understand is why I don't have to go through this procedure when changing the false template at the beginning.Hi Ken, False template? You can change the control template to any track gauge. It is set initially to T-55*, which as far as I know is not used by any modeller anywhere. But it could be used if someone wished to do so. *5.5mm/ft, 1 inch track gauge, 1.0mm flangeway gap. regards, Martin. |
||
posted: 16 Mar 2011 01:34 from: kenbec
click the date to link to this post click member name to view archived images |
Martin Wynne wrote: Kenneth Beckett wrote:What I don't understand is why I don't have to go through this procedure when changing the false template at the beginning.Hi Ken, Hello Martin, That's the template I was referring to I just didn't know what to call it, it's false in the sense that it isn't a genuine gauge in use. Unless I am wrong, from the information you have given me, the whatever you like to call it is the control template. What I was trying to change was in the background and had to be made the control template before the change I wanted to make took effect. Now I see it all, just another case of not quite understanding what I am doing but I am getting better. Even though there isn't a manual. Thanks for your help, Ken |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |