Templot Club Archive 2007-2020                             

topic: 1551Printer calibration data
author remove search highlighting
 
posted: 26 Jun 2011 18:40

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hello

Has the calibration data format changed? When printing with an old calibration file, the output was "interesting": compressed in one direction by the looks of it - I stopped the print sharpish as I was printing on banner paper.

Richard.

posted: 26 Jun 2011 18:54

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Interesting, or not: printing un-calibrated on A3 is fine. Printing un-calibrated on custom paper size, produces the same kind of output as the above, 6" in the X direction comes out at around 4".
Last edited on 26 Jun 2011 18:56 by richard_t
posted: 26 Jun 2011 19:19

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi Richard,

There is no change to the data format.

Please could you attach the .cal file here so that I can investigate?

Thanks,

Martin.

posted: 26 Jun 2011 19:22

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
richard_t wrote:
Interesting, or not: printing un-calibrated on A3 is fine. Printing un-calibrated on custom paper size, produces the same kind of output as the above, 6" in the X direction comes out at around 4".
Hi Richard,

Check the printer settings. I think you may have a "fit to width" or similar setting selected.

What is the custom paper size?

regards,

Martin.

posted: 26 Jun 2011 20:33

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hello

No fit to width isn't set anywhere. The paper size was 13" x 24".

Probably no help, but I exported the file to DXF, and printed fine from my CAD application.

Thanks.


Edit: Sorry forgot to add the calibration file; now attached
Attachment: attach_1116_1551_epson_stylus_photo_120_-_papertype.cal 225
Last edited on 26 Jun 2011 20:42 by richard_t
posted: 26 Jun 2011 21:35

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi Richard,

Thanks for posting the calibration file. It contains these settings:

head factor: 100%

roller factor: 100%

so in effect it does nothing.

Do the page outlines on the pad correctly match the page size?

I think you need to check the settings in the printer driver. Getting banner paper to work is usually a battle of wits. :( It may not work with custom paper sizes. Refer to your printer's manual.

regards,

Martin.

posted: 27 Jun 2011 09:32

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hello

Yes within Templot the page outlines on the pad match the page size. If I set the printer to non-banner, and cut the paper to size to start off with I still get the same result. Very frustrating.

Richard.

posted: 27 Jun 2011 10:31

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi Richard,

Can you summarize the problem again please? I've got a bit lost. :?

Are you saying that

1. Using a standard paper size, it works fine, calibrated or uncalibrated, single sheets or banner,

and

2. Using a custom paper size, it doesn't, calibrated or uncalibrated, single sheets or banner. ?

If so the problem is with your printer. Templot reads the page size information from the printer driver, but it has no knowledge of whether that is a standard size or a custom size.

If that's not what you are saying, could you summarize again exactly under what circumstances it works ok, and under what circumstances it doesn't?

I note that it is a photo printer. You haven't by any chance got it set to hi-res photo quality? That demands vast amounts of memory to no practical use, since a track template is perfectly satisfactory at 300dpi or 600dpi. Try changing to ordinary text letter quality or draft quality printing.

regards,

Martin.

posted: 28 Jun 2011 12:47

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
OK this is what I did : (:-D)

  • Selected printer, banner paper (which is photo paper), and the quality as photo paper.
  • Loaded calibration data
  • Printed from Templot, but stopped it pretty quick as it was clear something was a miss.
  • Unoaded banner paper from printer
  • Changed printer settings to plain A3, non-photo paper, non-banner
  • Printed, and had the same result as with banner.
  • Unloaded calibration data
  • Printed again, with plain A3, was fine this time
  • Tried again with banner paper, and again was wrong (after reseting settings correct for banner paper)
  • Cut up banner paper into 13" x 24"
  • Set up custom paper size in printer driver
  • Printed, again problem as before
  • Exported DXF file
  • Printed fine on cut up 13" x 24" from another application
The last time I printed banner paper with the current PUG it was fine.

Hope that helps.

posted: 20 Jul 2011 09:56

from:

richard_t
 
Nr. Spalding, South Holland - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Just a quick follow up - it looks like this printer, an Epson 1200, is going up the tip. It's decided not to take up paper properly and then get's a bit confused about where it is on the paper. As I can't get offical inks anymore and lack of a proper Windows 7 driver, I think it's time for it to go. (Although it not taking up paper isn't the cause of the issue here.)

Ho humm...



Templot Club > Forums > Development doings - archive > Printer calibration data
about Templot Club

Templot Companion - User Guide - A-Z Index Templot Explained for beginners Please click: important information for new members and first-time visitors.
indexing link for search engines

back to top of page


Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason. Problems with this web site? Contact webmaster@templot.com.   This web site uses cookies: click for information.  
© 2020  

Powered by UltraBB - © 2009 Data 1 Systems