Templot Club Archive 2007-2020
|
|||
| author | remove search highlighting | ||
|---|---|---|---|
|
posted: 1 Nov 2011 23:03 from: Rob Manchester
click the date to link to this post click member name to view archived images |
Hi all, Any brave person like to make me a template for an outside slip like the one Martin kindly showed us at :- gallery/46/original/46_060821_570000000.jpg I am thinking around a plan for a small O scale (32mm gauge)layout and one of these would be just great. I haven't the experience in Templot to do one myself. A 1:4 angle would be about right. Thanks in anticipation. Rob |
||
|
posted: 3 Nov 2011 10:39 from: Raymond
click the date to link to this post click member name to view archived images |
Rob Manchester wrote: Hi all, Hi Rob, Here is an attempt at an outside V4 double slip but it is at 31.5mm gauge. Regards Raymond |
||
| Attachment: attach_1228_1675_Outside_V4_slip.box 353 | |||
|
posted: 3 Nov 2011 15:29 from: Rob Manchester
click the date to link to this post click member name to view archived images |
Raymond, Very many thanks for that. Just what I need. Good of you to take the time to let me have it. Rob |
||
|
posted: 3 Nov 2011 20:12 from: Raymond
click the date to link to this post click member name to view archived images |
Rob Manchester wrote: Raymond, Dear Rob, It looked like a challenge, which I find difficult to resist but proved easier than I expected. No doubt Martin could have done it with fewer templates but I think it works. Regards Raymond |
||
| Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |