Templot Club Archive 2007-2020                             

topic: 18110-MF track gauges now available.
author remove search highlighting
 
posted: 28 Jan 2012 19:25

from:

Debs.
 
United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Following the encouragement of fellow 0-MF gauge modellers, and by kind permission of Martin to post here, I'm now able to offer for sale, a series of precision track gauging tools for our hitherto under catered-for gauge.

Update.....as of Sept., 24th., 2017:
I now have stock to hand of all the 0-MF (31.5mm. x 1.5mm.) precision track gauge products:
 
0-MF Brass roller gauges (with a large area of milled chord flat on one end) - £9.95 ea.
0-MF Brass adjoining line separation gauges (producing precise 6ft., 7ft. &10ft parallels) - £15.95 ea.
0-MF Laser cut and etched, gauged flat, stainless steel 1.5mm. slip gauges - £7.95 pr.
0-MF+ Brass roller, gauge-widened to 31.75mm. with 1.5mm. flangeway & 1.75mm. check-rail and double chord-flats (see use details below) - £12.95 ea.
Quoted prices exclude postage charge.

*N.B - All gauges are now diamond engraved, to denote their applicability and/or dimensions.
 
Introducing an 0-MF+ gauge -
If a layout contains tight radii, it has been recommended that modellers consider use of 0-MF+ gauging to assure smooth running through any such curved sections or turnouts, the 0-MF+ gauge includes a gauge-widening of 0.25mm. and precisely provides for the following:
- track gauge 31.75mm
- crossing flangeway 1.5mm
- running rail to check rail gauging 1.75mm  (i.e. the check gauge stays the same at 30.0mm.) 
- a chord-flat milled to both ends (opposingly phased)
 
msg-13493-0-25656400-1387746997_thumb.jpgmsg-13493-0-25656400-1387746997_thumb.jpgMy gauges sit only on the head of bullhead rail, as the 1.2mm. slot depth permits the rail being gauged to cant to the required angle when seated in moulded plastic or brass, scale chairs.

Purchase payment is accepted via Paypal, or by good old-fashioned cheque by post.
I`d be delighted to offer you further info. should it be required.......please make a note of the eMail address shown in this image: 2281_161414_370000000.gif2281_161414_370000000.gif and use it to send an eMail to me with your requirements.
Best wishes,
Debs.
2281_241720_490000000.jpg2281_241720_490000000.jpg

2281_241720_100000000.jpg2281_241720_100000000.jpg
Last edited on 24 Sep 2017 22:22 by Debs.
posted: 1 Aug 2012 02:35

from:

JoeBaio
 
New York - USA

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi Debs,

I don't know if you received my last message. I would like to buy (3) 31.5 gauges, also would want a pair of Slips if available. I need it sent to the U.S.A. Please send me payment instructions.

thanks
Joe



Templot Club > Forums > Trackbuilding topics > 0-MF track gauges now available.
about Templot Club

Templot Companion - User Guide - A-Z Index Templot Explained for beginners Please click: important information for new members and first-time visitors.
indexing link for search engines

back to top of page


Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason. Problems with this web site? Contact webmaster@templot.com.   This web site uses cookies: click for information.  
© 2020  

Powered by UltraBB - © 2009 Data 1 Systems