Templot Club Archive 2007-2020                             

topic: 2396template origins?
author remove search highlighting
 
posted: 3 Feb 2014 10:40

from:

its_all_downhill
 
North Yorkshire - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi all,

After a bit of a hiatus I have come back to my Temploting but am now trying to locate template at a distance from the baseboard edge (75mm) but in locating the Template at (X:0 Y:75) puts it in a different location to the Notch which I placed using GEOMETRY>NOTCH>SET NOTCH POSITION AND ANGLE at (X:0 Y:75) I have attached a screen shot.

I have done a search for 'Origin' and have found some matches and think this might be to do with page margins of the printer? Obviously I can manually move the template to where I want it but am curious to the reason of the discrepancy.

Thanks a lot.
Attachment: attach_1741_2396_Screen_Shot_2014-02-03_at_10.30.44.png     165

posted: 3 Feb 2014 11:34

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
its_all_downhill wrote:
After a bit of a hiatus I have come back to my Temploting but am now trying to locate template at a distance from the baseboard edge (75mm)
Hi,

Set the notch at the required location using geometry > notch > set notch position and angle... .

Then geometry > notch > shift onto notch (or MULTIPLY key on the number pad).

By first setting the peg position within the control template, this method allows you to set any part of the control template at a fixed location on the grid, at any angle.

regards,

Martin.

(p.s. tech notes to be ignored: :) The dimensions shown on the F7 mouse action are relative to the template starting position on its datum (the green dot on the Y-axis), measured to the start of the main road stock rail gauge-face (which is the calculation origin for the template). Each template can have its own datum on the Y-axis if needed. These dimensions aren't very meaningful to the user, especially after any rotation. They are mainly for my use in testing. See also geometry > shift/rotate > settings (expert) > menu items.)


posted: 3 Feb 2014 16:20

from:

its_all_downhill
 
North Yorkshire - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Thanks Martin, as usual it was in front of me and the phrase 'screw loose between chair and keyboard' springs to mind..

posted: 24 Feb 2014 00:00

from:

dave turner
 
United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hardware, firmware, software, and hardest of all Wetware.



Templot Club > Forums > Templot talk > template origins?
about Templot Club

Templot Companion - User Guide - A-Z Index Templot Explained for beginners Please click: important information for new members and first-time visitors.
indexing link for search engines

back to top of page


Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason. Problems with this web site? Contact webmaster@templot.com.   This web site uses cookies: click for information.  
© 2020  

Powered by UltraBB - © 2009 Data 1 Systems