|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 15 Mar 2014 12:56 from: Decauville1126
click the date to link to this post click member name to view archived images |
Hi all, Please excuse this very basic request from a newbie but I'm at a loss as to how to produce 'non-standard' turnouts for small dioramas. I did manage some templates in the old Trax2 but can't work out how to do it in Templot. The basic specification is for, say, a P4 6" radius turnout, diverging from straight track, constantly curved throughout (ie curved blades) and the crossing angle becomes whatever it does. More akin to tramway modelling but I have successfully got down to 3.5" radius with pointwork (I know I should get out more ...) in P4. If someone can give me a start then it would be most appreciated. I can then look at changing radii, Y-points, etc, and even joining them up for complete trackplans for small dioramas. I tend to dabble in a variety or scales/gauges but am definitely from the non-savvy school of computing! Peter Smith |
||
posted: 15 Mar 2014 12:58 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi Peter, Welcome to Templot Club. Some data for prototype industrial turnouts is at: http://templot.com/martweb/templot_forum.htm#industrial The smallest size (1:2) has a radius of 12.192 metres = 40 feet = 160mm in 4mm/ft scale = 6.3" radius. An exact replica requires a 6ft custom switch. However, you can get very close using the pre-set 1:24 short model switch in Templot. Set a curviform crossing, and adjust the crossing angle with F5 or F9 until you get 1:2 (for 6.4" radius) or 1:1.94 (for 6" radius). Set equalized-incremental timbering: 2_131455_370000000.png Above is for bullhead rail -- in practice such turnouts would almost certainly be light FB rail. Set head and foot. Ask again if you need to know where to find all these settings. regards, Martin. |
||
posted: 15 Mar 2014 12:59 from: Decauville1126
click the date to link to this post click member name to view archived images |
Hi Martin, Thanks for the info - I'm beginning to see how to do it. Once I've got the hang of how to store the individual pieces I'll hopefully be able have a go at joining them up to form a mini-layout. Peter. |
||
posted: 15 Mar 2014 13:53 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Decauville1126 wrote: Once I've got the hang of how to store the individual pieces I'll hopefully be able have a go at joining them up to form a mini-layout.Hi Peter, As that is a separate subject from industrial turnouts, I have moved the replies about it to a separate topic: topic 2422 regards, Martin. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |