|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 15 Feb 2020 17:45 from: Alan Kettlewell
click the date to link to this post click member name to view archived images |
Hi, I've started building a crossover (OMF) and laid one stock rail and its adjacent vee crossing assembly. Looking for advice please on how best to proceed from there. Many thanks Cheers ... Alan |
||
posted: 16 Feb 2020 11:20 from: Hayfield
click the date to link to this post click member name to view archived images |
My favoured approach is to fit both common crossings at the same time, ensuring that whilst keeping the crossover in gauge you also preserve the back to back measurements between the wing rails (don't rely on wing rail gauges) use check rail gauges. Get this right and the rest is plain sailing |
||
posted: 16 Feb 2020 17:29 from: Alan Kettlewell
click the date to link to this post click member name to view archived images |
Hi, Many thanks for your reply, very helpful and I can crack on with the second crossing now. Cheers... Alan |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |