Templot Club Archive 2007-2020                             

topic: 824blunt nose of switchblade and joggling of stock rail
author remove search highlighting
 
posted: 20 May 2009 07:20

from:

DANNY POSTHUMUS
 
 

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
Hi all

Can I have a blunt nose on the switchblade toe without joggling the stock rail?

I call the distance from the actual point of the switch to the blunt part of the switch the "VERTEX".

CAN THIS BE DONE:

danny_blade_table.gifdanny_blade_table.gif

thanks

regards

danny

posted: 20 May 2009 08:47

from:

Martin Wynne
 
West Of The Severn - United Kingdom

click the date to link to this post
click member name to view archived images
view images in gallery view images as slides
DANNY POSTHUMUS wrote:
Can I have a blunt nose on the switchblade toe without joggling the stock rail?

danny_blade_table.gifdanny_blade_table.gif
Hi Danny,

I'm sorry to say these "thick-tip" switches are not (yet) supported in Templot. They are the usual arrangement for USA-style AREA switches (where the blade tip thickness is normally 1/8", corresponding to your 3mm). They are on my "to do" list, but as they are not used in the UK they have not had priority. Sorry.

For a model construction template, you can simply create a custom switch with a "virtual toe" at the vertex, and extend the switch rail lengths by the vertex distance. Then during construction ignore the bit of blade between the vertex and the actual blade tips. Some calculations will be needed to get the timbers correctly located.

For your 1:1 drawings, you can represent them using partial templates. Proceed as above, then split out the "crossing rails" onto a separate template (do > omit rails and joint marks menu item). Then blank it up to the actual toe position (CTRL+F3 mouse action).

regards,

Martin.



Templot Club > Forums > Templot talk > blunt nose of switchblade and joggling of stock rail
about Templot Club

Templot Companion - User Guide - A-Z Index Templot Explained for beginners Please click: important information for new members and first-time visitors.
indexing link for search engines

back to top of page


Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so.
The small print: All material submitted to this web site is the responsibility of the respective contributor. By submitting material to this web site you acknowledge that you accept full responsibility for the material submitted. The owner of this web site is not responsible for any content displayed here other than his own contributions. The owner of this web site may edit, modify or remove any content at any time without giving notice or reason. Problems with this web site? Contact webmaster@templot.com.   This web site uses cookies: click for information.  
© 2020  

Powered by UltraBB - © 2009 Data 1 Systems