|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 6 Apr 2012 13:31 from: mike47j click the date to link to this post click member name to view archived images |
When I try to change the V crossing angle using F5, the 9ft curved switch changes to a 10ft one ? 32mm 0 gauge, latest version of Templot, not sure if anything other information is important. Mike Johnson |
||
posted: 6 Apr 2012 13:45 from: Martin Wynne
click the date to link to this post click member name to view archived images |
mike47j wrote: When I try to change the V crossing angle using F5, the 9ft curved switch changes to a 10ft one ?Hi Mike, When you adjust the turnout size using F5, Templot changes the switch to the most suitable size for the V-crossing angle. If you want to change the V-crossing angle without changing the switch, use F9 instead (Templot2/TDV). (Or in 091c right-click in F5 and lock the switch.) • If you want the snapping to 1/4 RAM steps to apply in F9 -- click the action > F9 V-crossing angle options > snap F9 to 1/4 RAM steps menu option. regards, Martin. |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |