|
|||
author | remove search highlighting | ||
---|---|---|---|
posted: 23 Oct 2018 18:54 from: johndon
click the date to link to this post click member name to view archived images |
Is there a convention when it comes to shoving timbers? As per the image below, the timbers clearly need to be shoved to avoid them hitting each other but what would the convention be, shove the timbers on the top track one way and those on the bottom track the other way until there are no conflicts or, for example, leave the timbers on the top as they are and only shove those on the bottom track? Thanks John 2828_231352_340000000.jpg |
||
posted: 23 Oct 2018 19:17 from: Jim Guthrie
click the date to link to this post click member name to view archived images |
In this case I would leave the lower sleepers where they are - there should be a fair gap between the sleeper and the turnout timber to allow for ballast to be worked on and packed. I would move the upper sleepers to the right until they fitted between the lower sleepers. This will give a wide-ish gap betweenthe sleeper and the turnout timber, but that wouldn't be too bad. Jim. |
||
posted: 23 Oct 2018 19:58 from: Martin Wynne
click the date to link to this post click member name to view archived images |
Hi John, The square-on timbering which you are using for the turnout suggests that the lower road is the main road / running line. In which case you should try to leave its timbering unaltered. The sleeper spacings at the rail joint provide the proper space for a fishplate to fit closely between the chairs. If the upper road is a siding, loop, etc., it does not need to be so robust, and the sleepers can be shoved around to fit between those of the main road. That can be by moving them along, or twisting them slightly. In this case the spacings match, so instead of shoving each timber individually you could use the CTRL-F4 roll rails mouse action. cheers, Martin. |
||
posted: 23 Oct 2018 20:12 from: johndon
click the date to link to this post click member name to view archived images |
Thank you both for the replies, much appreciated. John |
||
Please read this important note about copyright: Unless stated otherwise, all the files submitted to this web site are copyright and the property of the respective contributor. You are welcome to use them for your own personal non-commercial purposes, and in your messages on this web site. If you want to publish any of this material elsewhere or use it commercially, you must first obtain the owner's permission to do so. |